Epson EPL-8000 User Manual page 96

Level 2 Options
STOP BIT - Use this option to set the number of stop bits
l
on each character of information sent to the printer. Stop bits
signal the end of a character.
DTR - Use this option to turn the printer's ready
l
communications protocol ON or OFF. You can use DTR
protocol in combination with the XON/XOFF option setting.
XON/XOFF - Use this option to turn the XON/XOFF
l
communications protocol on or off. You can use XON/XOFF
protocol in combination with the DTR option setting.
ENQ/ACK - This option appears but is not effective in
l
your printer. Leave it set to OFF.
3-28 SelecType
Menu/submenu
Menu/submenu
Menu/submenu
Menu/submenu
Available options
1 or 2
Available options
ON or OFF
Available options
ON or OFF
Available options
ON or OFF