Epson EPL-8000 User Manual page 80

Using SelecType
Set the option
When you reach the option you want to select, press
the option. SET disappears from the display and the
to the right of the display indicating that the new option has been
selected.
At the same time,
indicating that you are back in the main menu.
Note: If you want to return to the main menu at any time
without changing a setting, press
Once you set an option, the setting remains in effect until you
change it again or turn off the printer. If you want a setting to
remain in effect even when you turn the printer off and on, you
can use the SYSTEM CONFIG option to save Level 1 settings and
the PCONFIG SAVE option to save Level 2 settings.
Exit SelecType
To exit SelecType from any main menu or submenu, press the
SelecType button as many times as necessary. When you see the
following message, press
3-12 SelecType
moves to the left of the main menu option,
one more time to exit:
to exit the submenu.
to set
icon moves