Testing the Printer
Printing a font sample
In addition to the test print patterns and the status sheet, you can
print a font sample that shows samples of the various fonts
available in the selected printer mode.
Press SelecType once to enter SelecType Level 1.
1.
Note:
If you have already chosen the INDIVIDUAL mode in
SelecType, and have set up more than one channel, the
following option appears on the display (the display shows
available channels only):
Press any arrow button to choose your channel; then go on to
2.
step
2.
Press
Press
several seconds to compose the font sample before it starts
printing. A portion of the printout is shown below.
4. Press SelecType twice to exit SelecType.
2-10
Testing and Connecting Your Printer
until FONT SAMPLE appears on the display.
twice to print the font sample. The printer takes