Installing Additional Memory - Epson EPL-8000 User Manual

Installing additional memory

To install a memory chip set or a
need a cross-head screwdriver and a chip puller or a flat-head
screwdriver. If you have questions about installing the chip
set or the board, contact your dealer for assistance.
WARNING:
when the power is on. Do not attempt to remove the
controller board unless the printer is turned off and the
power cord is unplugged. Also, try not to touch the
contacts on the printer's circuit board because many of
the components can be destroyed by the static electricity
in your body.
The rest of this chapter describes the procedures for installing a
memory chip set and/or the OK expansion board.
Removing the controller board
Unplug the power cable from the electrical outlet and from the
1.
back of the printer.
2. Disconnect all interface cables from the back of the printer.
memory
High voltages are present inside the printer
Memory Options
expansion board you
Options
7-25