Epson EPL-8000 User Manual page 93

AUTOFEED — When you set AUTOFEED to OFF, the
l
printer ignores the AUTOFEED signal on pin
send an automatic line feed (LF) command with each carriage
return (CR). When you set AUTOFEED to ON, the printer
adds a line feed to each carriage return it receives. If your text
lines overprint each other, set AUTOFEED to ON.
BUSY DELAY — Use BUSY DELAY to set the delay period
l
from the ACKNLG to the BUSY signal. Available settings are
0, and +5 microseconds plus MIN. The MIN option sets
-5,
the ACKNLG signal to high. For most applications, leave this
option set to the factory setting, 0 microseconds.
Before you can set options on the SERIAL submenus, you must
choose either
Menu/submenu
Menu/submenu
or
RS-232C RS-422
Menu/submenu
Available options
ON or OFF
Available options
-5, 0, +5, or MIN
to match your interface.
Available or options
RS232C
Level 2 Options
and does not
14
or
RS422
SelecType
I
3-25