Epson EPL-8000 User Manual page 150

Status and Error Messages
ILLEGAL CARD
[E]
The printer cannot read the card inserted in the slot indicated
on the display. To correct the error, press
error message remains, make sure the printer is off line and
remove the card. If the red CONTINUE light still flashes,
CONTINUE.
press
/
[S] INITIALLIZE
The printer is being initialized to the factory settings.
INSERT IMAGING CRTG
[E]
The imaging cartridge is not installed. Install it as described in
Chapter 5.
INSERT TRAY
[E]
The standard paper cassette is not installed. Install it as
described in Chapter 1.
[E]
The printer has insufficient memory available for the current
task. To correct the error, press CONTINUE. If the message
remains, press RESET or initialize the printer as described in
Chapter 3.
You can also clear this error by turning the printer off and
back on again. However, it may be necessary to simplify the
page you are trying to print or add more memory to the
printer. See Chapter 7 for more information on memory
options.
INVALID ASSIGN
[E]
If you assign PostScript to more than one channel, this
message appears when you attempt to exit from SelecType.
Press
assignments.
PAGE BUFFER FULL
[E]
Text or graphics data has filled the printer's buffer and the
printer has ejected an incomplete page. Press CONTINUE to
clear the error. You may need to add more memory to your
printer. See Chapter 7 for information on memory options.
6-4 Troubleshooting
to return to MODE ASSIGN and change the
CONTINUE.
If the