Epson EPL-8000 User Manual page 57

Changing the RITech setting
To change the RITech setting, use SelecType Level
select LIGHT, MEDIUM (the factory setting), HEAVY, or OFF. (If
necessary, see Chapter 3 for full instructions on using SelecType.)
If your check pattern is too heavy, change the setting to LIGHT; if
it is too light, change the setting to HEAVY; if you are printing
gray shading or screen patterns, change the setting to OFF.
To change your RITech setting, follow these steps:
Enter SelecType Level 2 by pressing the SelecType button until
1.
the Level 2 light comes on.
Press
2.
Press
3.
desired setting (LIGHT, MEDIUM, HEAVY, or OFF) appears
on the display.
Press
4.
pattern using the new RITech setting.
Look at the new check pattern to see if it is improved. If you
5.
wish, save the new setting by pressing
the main menu, then pressing
SAVE appears on the display, then pressing
If the pattern still needs to be improved, you probably need to
change the print density setting. For a darker (HEAVY) RITech
setting, make the print density lighter and vice versa. See
"Adjusting the print density" earlier in this chapter for
instructions.
Note:
Do not change the print density unless it is necessary.
Changing the print density affects all text and graphics, so check
the new setting by printing several pages.
or until RITech appears on the display.
once and then press
twice to set the new setting and print a new check
Testing and Connecting Your Printer
Enhancing Print Quality
2.
or until your
once to return to
or until P CONFIG
You can
twice.
2-15