Epson EPL-8000 User Manual page 66

Selecting the Printer Mode
HP LaserJet III emulation mode
When your printer is in HP LaserJet III (LJ-3) mode, the factory
setting, select one of the following drivers from your program's
printer selection menu:
HP LaserJet IIISi™
HP LaserJet IIIP™
HP LaserJet series III™
HP LaserJet IIP™
HP LaserJet series II™
HP LaserJet Plus™
HP LaserJet 500™
HP LaserJet™
See Appendix B for information on the difference between the
*
EPL-8000 and the IIISi.
If none of the above printers is listed among your program's
options, select any printer model that uses the HP Printer
Command Language (PCL).
Epson LQ and FX emulation modes
When your printer is in the Epson LQ or FX printer mode, select
one of the following drivers from your program's printer selection
menu:
LQ-2500
LQ-1050/850
LQ-1000/800 (expanded ESC/P) FX-80
LQ-500
LQ-1500 (with version 2 ROM)
LQ printer
If none of the printers listed are available from your program,
choose the first available of the following: RX, Epson printer,
Standard printer, or Draft printer.
Testing and Connecting Your Printer
2-24
*
(286e/86e)
FX-1000/800
FX-85