Level 2 Options
After you select the serial interface, you enter one of the submenus
shown below.
SERIAL
These settings must match the settings your computer is using.
Check your computer's manual.
The interface options are the same for both the RS-232C and
RS-422
serial interface modes.
WORD LENGTH - You can select B-bit word length or
l
7-bit word length. See your computer manual and software
documentation for the proper setting. The factory setting is
B-bit.
3-26
SelecType
Menu/submenu
Menu/submenu
Available options
WORD LENGTH
BAUDRATE
PARITY
STOP BIT
DTR
XON/XOFF
ENQ/ACK
DSR
CTS
Available options
7 or 8