Problems With Graphics - Epson EPL-8000 User Manual

Problems with Graphics

Graphic images do not print.
After changing the printer mode, you are unable to print graphics.
You may not have the correct printer driver installed. If you
l
try to print with a software package set for another printer,
nothing will be printed. Make sure that the driver matches the
currently selected operating mode.
You cannot print graphics using the serial interface
RS422).
The WORD LENGTH option in SelecType Level
l
set correctly. When printing graphics, make sure that you set
an 8-bit data word and not a 7-bit word.
When printing a mix of text and graphics, the page does not print
or is only partially printed. The display may also show SET FULL
PRINT.
The full print buffer setting needs to be changed. To correct
l
this error, change the FULL PRINT setting in the SelecType
LEVEL l SYSTEM CONFIG submenu.
Graphics cannot be printed and the display shows PAGE BUFFER
FULL.
The full print buffer or the receive buffer setting needs to be
l
changed. to correct this error, change the FULL PRINT or
RX-BUFFER setting in SelecType Level 1 as described in
Chapter 3.
Your printer may not have enough memory installed. You need
l
to simplify the page or install additional memory. Press the
CONTINUE button to clear the error. For information on
memory options, see Chapter 7.
(RS-232C
2
may not be
Troubleshooting
or
6-27