Loading Paper Memory Settings - Epson DFX-5000+ User Manual

8. Press the TOP OF FROM button.
9. Move the pointer to the label's lower right comer. Use the
MICRO FEED buttons to move the paper up or down and
manually move the print head left or right.
10. Press the TOP OF FORM button.
11. Close the printer cover.
12. If the printer beeps one or two times, the settings were
saved. If the printer beeps ten times, the settings were not
saved. In this case, turn off the printer and repeat steps 5
through 11.

Loading paper memory settings

1. Make sure the printer is turned off.
2. To recall the memory 1 setting, hold down the top MICRO
FEED button while you turn on the printer. To recall the
memory 2 setting, hold down the bottom MICRO FEED
button while you turn on the printer.
3-22 Using the Printer