Mechanical - Epson DFX-5000+ User Manual

Labels

Mechanical

Paper feed methods:
Ribbon:
MTBF:
Print head life:
Dimensions and weight:
Labels should be securely attached to
the backing sheet.
The backing sheet should be covered
with the label material, both in the label
area and in the spaces between labels.
(The backing sheet should not be
exposed.)
The corners of the labels should be
rounded.
The label surface should be flat.
Push tractor (front and rear)
Push-pull feed with optional pull tractor
Cartridge ribbon, available in black only
(#8766). Do not use ribbons for 24-pin
printers. Life expectancy is 15 million
characters (at 14 dots/character).
8000 power-on hours (25% duty)
Running the printer continuously for
extended periods of time is not
recommended. It can cause the printer to
wear out sooner than expected.
300 million characters at 14 dots per
character
Height: 369 mm (14.5 inches)
Width: 700 mm (27.6 inches)
Depth: 382 mm (15.0 inches)
Weight: 29 kg (approx. 64 lb)
Technical Specifications A-9