Epson DFX-5000+ User Manual page 80

MICRO FEED
Caution:
When using labels, use only the top MICRO FEED button.
Never feed labels backward through the printer.
These two buttons advance or reverse the
loaded paper in 1/216-inch increments.
You can use these buttons to adjust the
top-of-form, tear-off, and printing
positions.
To reset the top-of-form position, press
the TOP OF FORM button to enter
top-of-form mode. Then use the MICRO
FEED buttons to move the paper to the
desired position. See the section on
adjusting the top-of-form position in
Chapter 2.
To reset the tear-off position, press the
TEAR OFF button to enter tear-off mode
and feed the paper to the tear-off position.
Then use the MICRO FEED buttons to
move the paper to the desired position.
See the section on adjusting the tear-off
position in Chapter 2.
To adjust the printing position, press
either MICRO FEED button to advance or
reverse the paper to the desired position.
See the section on adjusting the printing
position in Chapter 2.
These buttons are also used for the paper
memory feature described later in this
chapter.
Using the Printer 3-5