Epson DFX-5000+ User Manual page 134

Multi-part forms
A-8 Technical Specifications
top view
double-sided crimping
It is best to use pressure-sensitive
multi-part forms.
The form sheets should be securely
joined together along the left and right
edges by crimping, spot-gluing, or tape
stitching. For the best printing quality,
use multi-part forms joined with
spot-gluing. Never use multi-part forms
joined with metalstaples.
Crimping should be pressed in from the
original sheet side and go completely
through all copy sheets. Also, crimping
should be double-sided; using
single-sided crimping may cause the
printer to jam.
top view
For multi-part forms joined with
spot-gluing, be sure the spots of glue are
spaced the same way on the left and
right edges of the paper.
The binding area should be flat and
have no creases.
Overlapping multi-part forms should be
joined together at the top of the pages
and not along the sides of the pages.
The sprocket holes of all sheets in the
form should be aligned properly.
The binding position should be outside
the printable area.
single-sided crimping