Character Tables - Epson DFX-5000+ User Manual

User-defined characters:
ASCII
nn
ESC =

Character Tables

These character tables are selected with the DIP switches or by using a
software command.
All tables except the italic character table are the same as the PC437 table
for hex codes 00 through 7F, so only the PC437 and italic tables are shown
completely. The rest of the tables show only the characters for hex codes
80 through FF.
The tables with * after the table name are available in the European
version only.
B-14 Printer Commands and Character Tables
Dec. Hex.
61 3D
Description
Define User-Defined Characters
n2 . . . nk
ESC = n1
If C is the total number of characters
to be defined
B = (C x 13) +2
n1
= MOD(B/256)
n2 =
INT(B/256)
n3 = 20 in all cases
n4 = the code of the first character to
be defined
n5
= 0 if the top 8 pins are used;
n5 = 128 for the bottom 8 pins
n6
= 0 in all cases
n7
The values through
numbers that define the characters,
with 11 data numbers for each
character.
nk
are the data