Using The Tear Off Button; Adjusting The Tear-Off Position - Epson DFX-5000+ User Manual

Using the TEAR OFF button

Whether or not the printer is in tear-off mode, you can use the
TEAR OFF button to advance continuous paper to the tear-off
position by following the steps below.
1. Make sure printing is finished. Then press the TEAR OFF
button. The printer advances the paper to the tear-off edge
and the TEAR OFF light comes on.
2. Tear off all printed pages. If the perforation is not aligned
with the tear-off edge, adjust the tear-off position as
described in the next section.
3. When you resume printing, the printer automatically feeds
the paper back to the loading position and begins printing.
(You can also manually feed the paper back to the loading
position by pressing the TEAR OFF button again.)

Adjusting the tear-off position

If the paper's perforation is not aligned with the tear-off edge,
follow the steps below:
1. Turn on the printer and select the desired tractor.
2-16
Loading and
Using Paper