Using the Pull Tractor
The optional pull tractor (#8309) provides optimum continuous
paper handling. The pull tractor is especially useful with
continuous multi-part forms and labels. When the pull tractor is
installed, the tear-off feature is not available. For best results, use
the pull tractor with either the printer's front or rear built-in
tractor, as described in this section.
Installing the pull tractor
To install the pull tractor, you need a cross-head screwdriver.
Note:
If you
going to be using the pull tractor with the built-in rear tractor,
are
should load
you
See the section on loading
tractor.
2.
1.
Turn off the printer and open the paper separator cover.
4-2
Using the Printer Options
onto
paper
the rear tractor before
installing the pull
onto the
paper
rear tractor
in Chapter