4. If the paper is not aligned with the tear-off edge, then press
the MICRO FEED buttons to feed the paper forward or
backward in l/216-inch increments. (You can also hold
down either MICRO FEED button to feed the paper
Note:
You can reset the tear-off position
when you are in
only
tear-off
the TEAR OFF button once and the
mode
(after you press
TEAR OFF light is on). The printer remembers the new
tear-off
position even after the printer is turned off, reset, or initialized.
5. Tear off the page using the tear-off edge on the printer's top
cover.
Loading and Using Paper
2-18