System Setup: Advanced Menu - BenQ HT9060 User Manual

• Menu Position: Sets the On-Screen Display (OSD) menu position.
• Menu Display Time: Sets the length of time the OSD will remain active after
Menu Settings
• Reminder Message: Sets the reminder messages on or off.
Renames the current input source to your desired name.
Source
On the Source Rename page, use / / / to set the desired characters for the
connected source item.
Rename
When done, press OK to save the changes.
Auto Source Allows the projector to automatically search for a signal.

SYSTEM SETUP: ADVANCED menu

• HDMI Range
Selects a suitable RGB color range to correct the color accuracy.
• CEC
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, turning on the HDMI CEC compatible device automatically turns on
HDMI
the projector, while turning off the projector automatically turns off the HDMI CEC
Settings
compatible device.
• Power On Link/Power Off Link
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, you can set the behavior of powering on/off between the device and
the projector.
Password See
With the control keys on the projector and remote control locked, you can prevent
your projector settings from being changed accidentally (by children, for example).
When the Key Lock is on, no control keys on the projector will operate except
To release panel key lock, press and hold
Key Lock
remote control for 3 seconds.
If you turn off the projector without disabling panel key lock, the projector will still be in locked
status the next time it is turned on.
your last key press.
• Auto: Automatically selects a suitable color range for the incoming HDMI
signal.
• Full: Utilizes the Full range RGB 0-255.
• Limited: Utilizes the Limited range RGB 16-235.
From Device
(for Power On Link)
From Projector
(for Power Off Link)
Utilizing the password function on page 20.
POWER.
When the connected device is turned on, the
projector will be activated, too.
When the projector is turned off, the connected
device will be shut down, too.
(the right key) on the projector or
Menu operation 31