System Setup: Advanced Menu - BenQ V7000i User Manual

Background Sets the background color for the projector.
Color
Splash Screen Allows you to select which logo screen will be displayed during projector start-up.
Allows the projector to turn off automatically if no input signal is detected after a
Auto Off
set period of time to prevent unnecessary waste of light source life.
Direct Power Allows the projector to turn on automatically once the power is fed through the
power cord.
On
• Menu Position: Sets the On-Screen Display (OSD) menu position.
• Menu Display Time: Sets the length of time the OSD will remain active after
Menu Settings
• Reminder Message: Sets the reminder messages on or off.
Renames the current input source to your desired name.
On the Source Rename page, use
Source
characters for the connected source item.
Rename
When done, press
Auto Source Allows the projector to automatically search for a signal.
• Sound Mode
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level.
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
Sound
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
• Reset Audio Settings: Returns all of the adjustments you've made in the
• Speaker: Turns on or off the projector's speaker(s).
• Audio Return(HDMI-2): Allows the projector's audio playback (through
• SPDIF: Enables or disables the SPDIF audio output port.
Eye Automatically blanks the screen when an object is within 30 cm in front of the
projection lens.
Protection

SYSTEM SETUP: ADVANCED menu

Light Source • Light Source Timer: See
Settings
38 Menu operation
your last key press.
• Effect Mode: A variety of sound modes for you to choose from.
• User EQ: When Effect Mode is set to User, you can further customize the
mode.
in startup and shutdown process.
Sound menu to the factory preset values.
HDMI 2) on other devices.
/ / / , and OK to set the desired
BACK to save the changes and exit.
Getting to know the light source hour on page 42.