Advanced Setup Menu - BenQ Home Entertainment Series User Manual

Advanced Setup menu

FUNCTION (default
setting / value)
Lamp Settings
Pattern
Dust Filter
High Altitude
(Off)
Password
Key Lock (Off)
Source Block
40 Menus
All manuals and user guides at all-guides.com
amp Power (Normal): Pre
L
•
control to set Normal or Economic as the power type of your projection.
Using Eco mode reduces system noise and reduces power consumption by
20%. If this mode is activated, the light output will be reduced and result in
darker projected images.
Setting the projector in Economic mode extends the lamp timer
automatic shutdown feature. For more information on how the total lamp
hour is calculated, see
Lamp Hours:
•
Lamp Hours Nor.:
i.
normal mode.
ii. Lamp Hours Eco.: Shows the total time of the lamp has been used in
economic mode.
iii. Lamp Rest Rate: Shows the percentage of the rest lamp life.
Reset Lamp Timer: Resets the lamp timer. This should only be done after
•
the lamp has been replaced. See
Use the patterns when installing the projector, even if there is no input signal.
Grid: Press ENTER to display the grid test pattern. It helps you adjust the
•
image size and the focus to ensure that the projected image is free of
distortion.
Color Bar: Press ENTER to display the color bar test pattern. After making
•
color adjustments, you can display this test pattern to check that the colors
are to your liking.
Dust Filter Hours: Shows the total time of the filter has been used.
•
Reset Dust Filter Timer: Reset the dust filter timer. This should only be
•
done after the filter has been replaced. See
for details.
This item is designed for those who use the projector in extreme environments, like
high temperature or high altitude. We recommend you select Yes when your
environment is higher than 3200 feet, or is hotter than 40°C. See
high altitude environment" on page 33
Password (Off): Limits use of the projector to only those who know the
•
correct password. When the function is activated for the first time, you have
to set a password for it. See
Once the password is set and this function is selected, the projector is
password-protected. Users who do not know the correct password can not
use the projector. The password can be entered by using either the buttons
on the projector or the remote control.
Change Password: You will be asked to enter the current password before
•
changing to a new one. See
Disables or enables all panel key functions except POWER on the projector and
buttons on the remote control. To release key lock, press and hold EXIT on the
control panel or remote control for 5 seconds.
Sets whether one or more than one source to be skipped or searched when the
projector is detecting input signals. See
on page 26 for details.
DESCRIPTION
ss Left or Right on the projector or remote
"Calculation of lamp hour" on page 44
Shows the total time of the lamp has been used in
"Replacing the lamp" on page 45
"To clean the filter:" on page 43
for details.
"Setting a password" on page 24
"Changing the password" on page 25
"Speeding up the process of source search"
for details.
for details.
"Operating in a
for details.
for details.