Adjusting The Sound - BenQ MX854UST User Manual

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speakers. Be
sure you have made a correct connection to the projector audio input. See
on page 22 for how the audio input is connected.
IN PU T SOU RCE
Computer
H D MI/MH L
VID EO
S-VID EO
Muting the sound
To temporarily turn off the sound,
• Using the remote control
MU T E
Press
display in the upper right corner of the screen.
To restore the sound, press
• Using the O SD menu
MEN U /EX IT
1. Press
menu is highlighted.
▼
2. Press
Audio Settings
The
3. H ighlight
4. To restore the sound, repeat steps 1-3 and press
Adjusting the sound level
To adjust the sound level,
• Using the remote control
Press or
• Using the O SD menu
1. Repeat steps 1-2 above.
▼
2. Press
Turning off the Power on/off ring tone
1. Repeat steps 1-2 above.
▼
2. Press
T he only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute
or changing the sound level will not affect the Power on/off ring tone.
O peration
AU DIO IN
to temporarily turn off the sound. W hile the sound is off, the screen will
MU T E
and then press
Audio Settings
to highlight
page displays.
◄
Mute
and press
to select a desired sound level.
Volume
to highlight
Power on/off ring tone
to highlight
mini jack
H D MI/MH L
RC A
RC A
again.
◄ ►
/ until the
MO DE/EN T ER
and press
►
O n
/ to select .
◄ ►
and press / to select a desired sound level.
and press
AU DIO O U T
mini jack
mini jack
mini jack
mini jack
System Setup: Advanced
.
◄ ►
O ff
/ to select .
◄ ►
/ to select
"Connection"
O ff
.
45