Connecting Directly To A Telephone Wall Jack; Connecting To A Telephone - Dell V505 User Manual

Connecting Directly to a Telephone Wall Jack

1. Connect one end of the phone cord to the FAX connector ( —lower connector).
2. Connect the other end of the phone cord to an active telephone wall jack.

Connecting to a Telephone

1. Connect a phone cord from the FAX connector ( —lower connector) on the printer to an active telephone wall jack.
2. Remove the blue protective plug from the PHONE jack connector (
3. Connect a phone cord from the telephone to the PHONE jack connector (
NOTE: If phone communication is serial in your country (such as Germany, Sweden, Denmark, Austria,
Belgium, Italy, France, and Switzerland), remove the blue plug from the PHONE jack connector (
connector), and insert the supplied yellow terminator for your fax to work correctly. You will not be able to
use this port for additional devices in these countries.
What if I have a Digital Subscriber Line (DSL)?
DSL delivers digital data to a computer through a telephone line. Your printer is designed to work with analog data. If you
are faxing over a telephone line connected to a DSL modem, install a DSL filter to avoid interference with the analog fax
modem signal.
NOTE: Integrated Services Digital Network (ISDN) and cable modems are not fax modems and are not supported
for faxing.
—middle connector).
—middle connector).
—middle