When You Cannot Make Copies As Wanted - Ricoh Aficio MP C2500 EFI Troubleshooting Manual

Troubleshooting When Using the Copy Function
When You Cannot Make Copies as
Wanted
This section explains likely causes of and possible solutions for unclear copies.
❖ Basic
2
Problem
Misfeeds occur frequently. The number of sheets loaded ex-
Misfeeds occur frequently. The paper is damp.
Misfeeds occur frequently. The paper is too thick or too thin. Use recommended paper. See
Misfeeds occur frequently. The copy paper is wrinkled or
Misfeeds occur frequently. Printed paper is being used.
Copy paper becomes
creased.
Copy paper becomes
creased.
Copies are not stapled.
Copies are not stapled.
Copies are not stapled.
22
Cause
ceeds the capacity of the machine.
has been folded/creased.
The paper is damp.
The paper is too thin.
There are jammed staples in the
stapler.
The number of copies exceeds the
capacity of the stapler.
Copy paper is curled.
Solution
Load paper only as high as the
upper limit markings on the side
fences of the paper tray or bypass
tray. See "Copy Paper", About
This Machine.
Use paper that has been stored in
the recommended temperature
and humidity condition. See
"Copy Paper", About This Ma-
chine.
"Copy Paper", About This Ma-
chine.
Use recommended paper.Use pa-
per that has been stored in the
recommended temperature and
humidity condition. See "Copy
Paper", About This Machine.
Use recommended paper. Do not
use paper that has been already
copied or printed onto. See "Copy
Paper", About This Machine.
Use paper that has been stored in
the recommended temperature
and humidity condition. See
"Copy Paper", About This Ma-
chine.
Use recommended paper. See
"Copy Paper", About This Ma-
chine.
Remove jammed staples. See
p.111 "Removing Jammed Sta-
ples".
Check the stapler capacity. See
"Supplementary Informations",
Copy/Document Server Refer-
ence.
Turn the copy paper over in the
tray.