Moving - Ricoh Aficio MP C2500 EFI Troubleshooting Manual

Remarks
Environments to Avoid
• Locations exposed to direct sunlight or other sources of strong light (more
than 1,500 lux).
• Locations directly exposed to cool air from an air conditioner or heated air
from a heater. (Sudden temperature changes can cause condensation to form
inside the machine.)
• Locations close to machines generating ammonia, such as a diazo copy ma-
chine.
• Places where the machine will be subject to frequent strong vibration.
• Dusty areas.
• Areas with corrosive gases.

Moving

The following describes precautions when moving the machine.
R CAUTION:
• Contact your service representative if you need to lift the machine (such as
when relocating it to another floor). Do not attempt to lift the machine without
the assistance of your service representative. The machine will be damaged
if it topples or is dropped, resulting in malfunction and risk of injury to users.
The machine's various handling areas are for service engineer use only. Do
not touch these areas.
8
R CAUTION:
• Before moving the machine, be sure to disconnect all external connections,
especially the power cord from the wall outlet. Damaged power cords are a
fire and electric shock hazard.
R CAUTION:
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will not
be damaged under the machine.
Important
❒ Be careful when moving the machine. Take the following precautions:
• Turn off the main power. See p.42 "Turning Off the Main Power / In the
Event of Power Failure".
• Unplug the power cord from the wall outlet. When you pull out the plug
from the socket, grip the plug to avoid damaging the cord, thereby reduc-
ing the risk of fire or electric shock.
• Close all covers and trays, including the front cover and bypass tray.
118