Ricoh Aficio MP C2500 EFI Troubleshooting Manual page 66

Troubleshooting When Using the Printer Function
Problem
White lines ap-
pear.
When printing
graphics, the out-
put and the
screen are differ-
ent.
4
Garbled charac-
ters are printed.
Images are print-
ed in the wrong
orientation.
There is consid-
erable delay be-
tween the print
start instruction
and actual print-
ing.
58
Cause Solution
When D is blink-
Add toner. See p.90 "Adding Toner".
ing, toner is be-
ginning to run
out.
If the printer If you want to print accurately, set the printer driver to
driver is config- print without using the graphics command. See the
ured to use the printer driver Help.
graphics com-
mand, the graph-
ics command
from the ma-
chine is used to
print.
The correct print- Set the correct printer language.
er language
might have not
been selected.
The feed orienta- Set the machine's feed orientation and the printer driv-
tion you selected er's feed orientation accordingly. See the printer driver
and the feed ori- Help.
entation selected
in the printer
driver's option
setup might not
be the same.
"Off mode / The machine requires time to warm up if it has been in
Sleep mode" "Off mode/Sleep mode". Specify "Off mode/Sleep
might be set. mode" in [System Settings], [Auto Off Timer].