Loading Paper Into The Large Capacity Tray - Ricoh Aficio MP C2500 EFI Troubleshooting Manual

C
Carefully push the paper tray fully in.
Note
❒ If you load a paper size that is not selected automatically, you will need to
specify the paper size with the control panel. Following paper sizes that
are not selected automatically.
1
• 8 / "×14"L
2
1
• 8 / "×11"KL
2
• 11"×17"L
1
• 8 / "×14"L
4
1 1
• 7 / "×10 /
4 2
• 8"×13"L
1
• 8 / "×13"L
2
1
• 8 / "×13"L
4
• 8KL
• 16KKL
Reference
p.84 "Changing the Paper Size"
p.87 "Changing to a Size That is Not Automatically Detected"

Loading Paper into the Large Capacity Tray

The following procedure explains loading paper into the LCT.
Important
❒ LCT (optional) uses A4K paper exclusively. Only load A4K paper. If you
1
want to load 8 /
❒ Align the paper stacks and load them against the left and right walls, or a pa-
per misfeed might occur.
❒ Do not stack paper over the limit mark.
A
Pull out the LCT, slowly until it stops.
"KL
"×11"K, contact your service representative.
2
AMJ003S
Loading Paper
6
81