Ricoh Aficio MP C2500 EFI Troubleshooting Manual page 32

Troubleshooting When Using the Copy Function
❖ Edit
Problem
In Double Copies
mode, parts of the orig-
inal image are not cop-
ied.
In Border, Centre, or
2
Centre/ Border mode,
parts of the original im-
age are not copied.
In Border, Centre, or
Centre/ Border mode,
parts of the original im-
age are not copied.
In Margin Adjustment
mode, parts of the orig-
inal image are not cop-
ied.
In Margin Adjustment
mode, parts of the orig-
inal image are not cop-
ied.
In Image Repeat mode,
the original image is
not copied repeatedly.
❖ Stamp
Problem
The stamp position is
wrong.
24
Cause
Combination of original and
copy paper is not correct.
You set a wide erased margin.
Originals are not scanned correct-
ly.
You set a wide erased margin.
There is a lack of margin space on
the opposite side of the binding
position.
You selected copy paper the same
size as the originals, or you did
not select the proper reproduc-
tion ratio.
Cause
The paper orientation is wrong.
Solution
Select A3L for A4K originals
and A4 for A5 originals (when
copying at a ratio of 100%).
Make the margin width narrow-
er. You can adjust it between 2-
99mm (0.1"-3.9"). See "Erase Bor-
der Width" and "Erase Centre
Width", General Settings Guide.
Place the originals correctly.
Set a narrower margin with User
Tools. You can set the width be-
tween 0-30 mm (0"-1.2").
See "Front Margin: Left/Right",
"Back Margin: Left/Right",
"Front Margin: Top/Bottom" and
"Back Margin: Top/Bottom",
General Settings Guide.
Set a narrower margin with User
Tools. You can set the width be-
tween 0-30 mm (0"-1.2").
See "Front Margin: Left/Right",
"Back Margin: Left/Right",
"Front Margin: Top/Bottom" and
"Back Margin: Top/Bottom",
General Settings Guide.
Select copy paper larger than the
originals or select the proper re-
production ratio.
Solution
Check the paper orientation and
stamp position.