3.6
Option settings for Fax TX
4
Load the next original, then press the Start key.
% Press [Change Setting] to change the option settings according to the new original as necessary.
5
Repeat Step 4 until all pases of the original are scanned.
6
After all originals are scanned, tap [Finish] and press the Start key.
Sending starts.
Related setting
-
You can select whether to scan originals continuously at all times even though [Separate Scan] is not
specified when scanning originals using the Original Glass (Default: [No]). For details, refer to
page 10-6.
3.6.3
Adjusting the image quality or density (Application settings)
Selecting the appropriate image quality for the contents of the original
([Original Type])
Select the appropriate type according to the contents of the original in order to scan it with optimal level of
image quality.
For details, refer to page 9-12.
bizhub C754/C654
3
3-23