[Group] - Konica Minolta bizhub C654 User Manual

Settings
[No.]
[Name]
[Sort Character]
[Index]
[Fax Number]
[Line Setting]
Tips
- To check the settings for a registered destination, select its registered name, then tap [Check Job Set.].
- To change the settings for a registered destination, select its registered name, then tap [Edit].
- To delete a registered destination, select its registered name, then tap [Delete].
Related setting (for the administrator)
- You can select whether to have the user enter a fax number twice when registering the fax number (De-
fault: [OFF]). This is helpful to prevent the fax number from being incorrectly registered. For details, refer
to page 11-21.

[Group]

To display: [Utility] - [Administrator Settings] - [One-Touch/User Box Registration] - [Create One-Touch Des-
tination] - [Group] - [New]
Register multiple destinations as a group. You can register different types of destinations for a group, such
as E-Mail TX, SMB Send and Fax TX.
bizhub C754/C654
Description
Destination registration number.[No.] is automatically registered using an
unused smaller number. If you want to specify a number, tap [No.] and en-
ter the number within the range of 1 to 2000.
Enter the destination name that appears on the Touch Panel (using up to
24 characters).
Assign a name that helps you easily identify the destination.
Enter the same name as the registered (using up to 24 characters).
You can sort destinations by registration name.
Select a corresponding character so that the destination can be index-
searched by registration name.
• If an alphabet character is specified for the initial of a registration name,
search text is automatically specified with the alphabet character. If an-
ything other than alphabet character is specified for the initial of a reg-
istration name, [etc] is specified by default.
• For a frequently used destination, also select [Favorites]. If [Favorites]
is selected, the destination will appear in the main screen of the
fax/scan mode, enabling the user to easily select a destination.
Enter a destination fax number.
• When you use this machine in a PBX environment, tap [Outside] ([E-]
appears). A registered outside line number is automatically inserted.
• When you use this machine in a PBX environment, press [Pause] fol-
lowing the outside line number ([P] appears) to ensure the dialing.
• If you want to send out a push signal over the dial line, tap [Tone] ([T]
appears).
• Press [-] to separate a dial number. This does not affect the dialing of
the number.
As necessary, specify how to send a fax to a destination you want to reg-
ister. You can change the settings you made here before sending a fax.
• [Overseas TX]: Used to send a fax to areas where communication con-
ditions are poor. Faxes are sent at a lower speed.
• [ECM OFF]: Generally, faxes are sent while checking that the fax data
is free of errors by using ECM (Error Correction Mode). To reduce the
time required to send a fax, tap [ECM OFF].
• [V34 OFF]: Generally, faxes are sent in the Super G3 mode. If it is not
possible to send faxes in the Super G3 mode, tap [V34 OFF].
• [Check Dest. & Send]: When using the Check Dest. And Send function,
select [Yes]. The fax number specified for fax is checked against the re-
mote fax number (CSI) and the fax is only sent when they match.
• [Select Line]: If two lines are used, select the line used to send a fax. If
[Unset] is selected, either line, whichever is not busy, is used for trans-
mission.
11
11-11