[Fax Header Settings]; [Line Setting] - Konica Minolta bizhub C654 User Manual

Settings
[ON]/[OFF]
[No. of Sets]
[Simplex/Duplex]
[Staple]

[Fax Header Settings]

To display: [Scan/Fax] - [Application] - [App] - [Fax Header Settings]
Normally, the default sender name is added. However, you can use different sender names depending as
necessary.
If you want to use a sender name that is different from the default name, select a new sender name you want
to use, then tap [OK].
Related setting (for the administrator)
- By registering multiple sender names, you can use different sender names depending on the destina-
tion. For details on the registration procedure, refer to page 11-14 ([Sender]).

[Line Setting]

To display: [Scan/Fax] - [Application] - [Fax Setting] - [Line Setting]
Specify how to send a fax based on the line conditions.
bizhub C754/C654
Description
Select [ON] to send and print at the same time.
If necessary, enter the number of copies to print.
Select [2-Sided] to print on both sides of sheets of paper.
Select the binding positions for stapling the sheets.
• [Corner]: Each set of printed sheets is stapled in a corner (top left or top
right) before it is output.
• [2 Position]: Each set of printed sheets is stapled at two positions (in the
top, left, or right) before it is output.
• [Position Setting]: Select the binding position. If [Auto] is specified for
the binding position, the binding position is determined automatically.
9
9-18