[Incomplete Tx Hold]; [Pc-Fax Permission Setting]; [Pc-Fax Rx Setting]; [Tsi User Box Setting] - Konica Minolta bizhub C654 User Manual

Settings
[Forward Dest.]
[Select Line]

[Incomplete TX Hold]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Incomplete TX Hold]
Configure the settings for using the Fax Retransmit function.
Fax Retransmit is a function that stores a fax that could not be sent by Redial in the machine's user box for
a given period of time. A stored fax job can be resent later by recalling it from the box.
Settings
[Yes]/[No]
[File Storage Duration]

[PC-Fax Permission Setting]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [PC-Fax Permission Set-
ting]
Select whether to allow PC-Fax TX using the fax driver.
[Allow] is specified by default.

[PC-Fax RX Setting]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [PC-Fax RX Setting]
Configure the settings for using the PC-Fax RX function.
PC-Fax RX is a function that automatically saves a received fax to the Compulsory Memory RX User Box or
a user box specified in F-Code (SUB Address). A stored fax job can be read from a user box into a computer.
Settings
[Allow]/[Restrict]
[Receiving User Box Desti-
nation]
[Print]
[Password Check]

[TSI User Box Setting]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [TSI User Box Setting]
Configure the settings for using the TSI Routing function.
bizhub C754/C654
Description
Specify a forwarding destination for a received fax.
Directly enter the appropriate fax number using the Keypad or tap [Select
from Address Book] and select one of the destinations registered on this
machine.
You can specify [File Type] and convert a fax into a file except when the
destination is a fax.
If two lines are used, select the line used to send a fax. If [No Selection] is
selected, either line, whichever is not busy, is used for transmission.
[No Selection] is selected by default.
Description
Select whether to use the Fax Retransmit function.
[No] is specified by default.
Specify the time period during which a fax failed to be sent is stored in the
machine's user box.
[12 Hours] is specified by default.
Description
Select whether to use the PC-Fax RX function.
[Restrict] is specified by default.
Select either [Memory RX User Box] or [Specified User Box] (a User Box
specified in F-Code (SUB Address)) as the location to save received faxes.
Select whether to print a received fax after it has been received.
[OFF] is specified by default.
If you select [Specified User Box] for [Receiving User Box Destination], se-
lect whether to check the communication password (sender ID) for PC-Fax
reception.
If [ON] is selected, enter the requested password (a number containing up
to eight digits).
11
11-22