[Fax Tx Settings]; [Job Priority Operation Settings]; [Preview Settings] - Konica Minolta bizhub C654 User Manual

Tips
- To check or edit a header/footer program you registered, select it, then tap [Check/Edit].
- To delete a header/footer program you registered, select it, then tap [Delete].

[Fax TX Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Stamp Settings] - [Fax TX Settings]
Select whether to cancel stamp setting when sending a fax. Normally, cancel the stamp setting to prevent
image becoming unreadable when a stamp is printed.
[Cancel] is specified by default.

[Job Priority Operation Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Job Priority Operation Settings]
Specify the printing priority order and whether to skip a job when you cannot perform a printing job immedi-
ately.
Settings
[Fax RX Job Priority]
[Skip Job (Fax)]
[Skip Job (Copy, Print)]

[Preview Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Preview Settings]
Specify the preview function settings, such as the display mode of preview images that appear when Preview
is pressed on the Control Panel.
Settings
[Original Direction Confir-
mation Screen]
[Realtime Preview]
[Preview Display Condi-
tions (Standard Applica-
tion)]
[Preview Display Condi-
tions (Registered Applica-
tion)]
bizhub C754/C654
Description
Select whether to give priority to the printing of a fax if it is received during
copying or printing.
[No] is specified by default.
Select whether or not to handle the subsequent job as long as it is a print-
ing job for the received fax when printing has stopped because, for exam-
ple, there is no paper.
[Yes] is specified by default.
Select whether or not to handle the subsequent job as long as it is not a
printing job for the received fax when printing has stopped because, for ex-
ample, there is no paper.
[Yes] is specified by default.
Description
Specify whether or not to display the screen to select the direction in which
the original is loaded after pressing Preview when scanning the original in
the fax/scan mode.
[ON] is specified by default.
Select whether or not to display a preview image for each page when scan-
ning an original in Scan/Fax mode.
Each preview image shows the scanned original as is.
[OFF] is specified by default.
Select the conditions for displaying preview images.
• [Jobs Executed]: Shows a preview image when Start is pressed to ex-
ecute a job as well as when Preview is pressed.
• [Preview Settings Screen]: Shows a preview image only when Preview
is pressed.
[Preview Settings Screen] is specified by default.
Select the display conditions for preview images when using an OpenAPI
application.
• [Job Executed]: Shows a preview image when Start is pressed to ex-
ecute a job as well as when Preview is pressed.
• [Preview Settings Screen]: Shows a preview image only when Preview
is pressed.
• [Use Standard App. Settings]: Follows the setting for [Preview Display
Conditions (Standard Application)].
[Preview Settings Screen] is specified by default.
11
11-9