[Tti Print Position And Character Size]; [Print Receiver's Name]; [Footer Position]; [Line Parameter Setting] - Konica Minolta bizhub C654 User Manual

[TTI Print Position and Character Size]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Header/Footer Position] - [TTI Print Position
and Character Size]
Select the size of characters used for printing sender information.
Settings
[Normal]
[Minimal]
Tips
- If [Normal] is selected for the scanning resolution for sending a fax, it is converted into [Normal] to pre-
vent characters from becoming corrupted and unreadable.

[Print Receiver's Name]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Header/Footer Position] - [Print Receiver's
Name]
Select whether to print a destination fax number as Header Position.
If [OFF] is selected, the fax number of this machine is printed instead of the fax number of the destination.
[ON] is selected by default.
Tips
- In the North American and Hong Kong models, [Print Receiver's Name] is hidden.

[Footer Position]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Header/Footer Position] - [Footer Position]
Select whether to print reception information (date, time, and reception number) on faxes received on this
machine. To print the information, select the footer position where receiver information is printed.
Settings
[Inside Body Text]
[Outside Body Text]
[OFF]

[Line Parameter Setting]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Line Parameter Setting]
Configure the environment to use fax functions with this machine, such as the types of telephone lines (dialing
method) and fax receive mode.
Settings
[Dialing Method]
[Receive Mode]
[Number of RX Call Rings]
[Number of Redials]
[Redial Interval]
bizhub C754/C654
Description
Prints the sender information in the normal text size.
Reduces the text height to a half of the size set with [Normal]. It is recom-
mended that you select [Minimal] to prevent a fax image from being cut off
or to prevent a page from being divided when pages are printed at a receiv-
ing machine.
[Minimal] is selected by default.
Description
Prints the receiver information inside the original image. Part of the original
image may be cut off.
Prints the receiver information outside the original image.
Prints nothing for receiver information.
[OFF] is specified by default.
Description
Select the line type according to your environment.
Select a receive mode.
If necessary, change the number of times the phone rings before automat-
ically receiving a fax.
If the machine fails to send a fax successfully, it automatically redials the
same destination after the elapse of a certain period of time. If necessary,
change the number of redials.
If necessary, change the redial intervals when you specified a value in
[Number of Redials].
11
11-15