Adjusting Image Quality Level/Density (Application Settings); Selecting The Appropriate Image Quality Level For The Original ([Original Type]); Selecting The Scanning Density Of The Original ([Density]) - Konica Minolta bizhub C754 User Manual

1.4 Option settings for fax transmission
4
Load the next original, then press the Start key.
% If desired, tap [Change Setting] to change the option settings according to the new original.
5
Repeat Step 4 until all originals are scanned.
6
After all originals have been scanned, tap [Finish], and press the Start key.
Transmission begins.
Related setting
- Select whether to always scan originals continuously without specifying [Separate Scan] when scan-
ning originals using the Original Glass (default: [No]). For details, refer to page 6-8.
1.4.3

Adjusting image quality level/density (Application settings)

Selecting the appropriate image quality level for the original ([Original Type])

Select the optimum image quality level for the original and scan at the optimal level of image quality.
For details, refer to page 5-15.

Selecting the scanning density of the original ([Density])

Select the scan density (dark, light) of the original.
For details, refer to page 5-16.
bizhub C754/C654
1
1-22