[Book Original] - Konica Minolta bizhub C654 User Manual

Settings
[Original Setting]
[Despeckle]
[Blank Page Removal]
[Binding Position]
[Original Direction]
Related setting
- In case blank pages are not detected correctly even though scanning has taken place with [Blank Page
Removal] enabled, adjust the detection level for blank pages. For details, refer to page 10-6.

[Book Original]

To display: [Scan/Fax] - [Application] - [No. of Originals] - [Book Original]
You can scan two-page spreads such as books and catalogs separately into left and right pages, or scan
them as one page. If you place a book or catalog on the Original Glass, you do not need to close the ADF
to scan it.
bizhub C754/C654
Description
Configure the setting so as to scan originals accurately according to the
properties of the originals to be loaded.
• [Mixed Original]: Even for an original with pages of different sizes, by
using ADF, you can scan data while detecting the size for each page.
If the widths of the originals are the same, select [Same Width]. If the
widths of the originals are different, select [Different Width].
• [Thin Paper Original]: Reduce the original feed speed of the ADF to pre-
vent the original from getting caught.
• [Z-Folded Original]: Even the original sizes of folded originals can be
detected accurately.
• [Long Original]: Select this option when loading a long original which is
larger in the feeding direction than full standard size (11 e 17 or A3).
Scan an original using the ADF while removing dust from the Slit Scan
Glass.
It takes longer to finish scanning compared to normal operation.
Blank pages contained in the original loaded into the ADF are skipped
when the original is scanned.
Select this check box when scanning an original which contains blank pag-
es. Any blank pages that are detected are not counted as original pages.
When scanning a double-sided original, select the original binding position
to prevent the binding positions being reversed between the front and rear
faces.
• [Auto]: The binding position is automatically set. When the long side of
the original is 11-11/16 inches (297 mm) or less, the binding position is
set to the long side of paper. When the long side of the original exceeds
11-11/16 inches (297 mm), the binding position is set to the short side
of paper.
• [Left Bind]: Select this option when the binding position is set to the left
of the original.
• [Top Bind]: Select this option when the binding position is set to the top
of the original.
Specify the orientation of the loaded original.
9
9-10