[File After Polling Tx]; [No. Of Sets (Rx)]; [Individual Receiving Line Setup]; [Individual Sender Line Setup] - Konica Minolta bizhub C654 User Manual

[File After Polling TX]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [File After Polling TX]
Select whether to delete a file after it is sent in response to a polling request if the Polling TX function is used
to register files for polling.
[Delete] is specified by default.

[No. of Sets (RX)]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [No. of Sets (RX)]
If necessary, change the number of copies to print a fax.
[1] is selected by default.

[Individual Receiving Line Setup]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Individual Receiving Line
Setup]
Select whether to receive faxes via respective lines separately if two lines are operating.
In receiving faxes per line, you can use reception functions, such as TSI Routing and Forward TX.
[OFF] is specified by default.

[Individual Sender Line Setup]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Individual Sender Line Set-
up]
Select whether to use different sender names for the respective lines if two lines are operating.
[OFF] is specified by default.

[Function Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings]
Configure the settings for using various fax transmission and reception functions.
Settings

[Function ON/OFF Setting]

[Memory RX Setting]
[Closed Network RX]
[Forward TX Setting]
[Incomplete TX Hold]
[PC-Fax Permission Set-
ting]
[PC-Fax RX Setting]
[TSI User Box Setting]
[Function ON/OFF Setting]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting]
Enable or disable fax transmission and reception functions, such as Confirm Address that prevents wrong
fax transmission, F-Code TX, and Relay RX.
bizhub C754/C654
Description
Enable or disable fax transmission and reception functions, such as Con-
firm Address that prevents wrong fax transmission, F-Code TX, and Relay
RX.
Configure the settings for using the Memory RX function.
Configure the settings for using the Closed Network RX function.
Configure the settings for using the Forward TX function.
Configure the settings for using the Fax Retransmit function.
Select whether to allow PC-Fax TX using the fax driver.
Configure the settings for using the PC-Fax RX function.
Configure the settings for using the TSI Routing function.
11
11-19