Sending Scanned Data To The Ftp/Smb Server - Konica Minolta bizhub 215 Quick Manual

5

Sending scanned data to the FTP/SMB server

The following describes the procedure for sending scanned data to the FTP/SMB server.
1
Press Scan.
2
Load the original.
% For details on how to load the original, refer to page 1-37.
3
Specify the resolution setting.
% Use +, to select the correct setting, then press OK.
% Select [150e150dpi], [300e300dpi], or [600e600dpi].
% When [Color] or [Gray] is specified for the color setting, [600e600dpi] is not displayed.
4
Specify the color setting.
% Use +, to select the correct setting, then press OK.
% Select [BW], [GRAY], or [COLOR].
% If [BW] is selected with [Image Format] set to [JPEG], [PDF] is automatically selected.
5
Specify the image quality.
% Use +, to select the correct setting, then press OK.
% Select [TEXT/PHOTO], [TEXT], or [PHOTO].
5-4
Sending scanned data
bizhub 215
5.1