Using Ssl For Communication From This Machine To Vista/7/Server 2008 With Web Service; Tcp/Ip Settings; Web Service Common Settings; Action For Invalid Certificate - Konica Minolta bizhub 361 Network Manual

Setup items by operation
1.29 Using SSL for communication from this machine to Vista/7/Server
2008 with Web service
Note
In order to make the communication between this machine and the computer into the SSL
communication, settings for the SSL communication must be made bidirectionally. Both this setting
and the
service" on page 1-83
When using the Web service function, specify settings for SSL-based encryption of communication from this
machine to a Windows Vista/7/Server 2008-equipped computer. These settings ensure safer file
transmission by encrypting Web service-based communication using SSL.
Specify the settings according to the following flowchart.
!
Detail
To encrypt communication from this machine to a computer using SSL, create a certificate at the
computer side in advance to associate TCP/IP with the communication port. (Default: Port No. 5385).
1.29.1

TCP/IP Settings

Specify settings to use this machine in a TCP/IP network environment.
For details, refer to
1.29.2

Web Service Common Settings

In Administrator mode of PageScope Web Connection, select the Network tab - "Web Service Settings" -
"Web Service Common Settings".
Specify the following settings.
Item
Friendly Name
SSL Setting
501/421/361
"Using SSL for communication from Vista/7/Server 2008 to this machine with Web
setting should be made.
Web Service Common Settings

Action for Invalid Certificate

"Specifying general settings for TCP/IP-based communication" on page
Definition
Specify setting for Friendly Name (up to 62 characters).
Select "Enable".
TCP/IP Settings
Finish
1
1-2.
Prior confirmation
1-84