For Remote Printer Mode With Netware 4.X Bindery Emulation; For The Print Server Mode With Netware 4.X Bindery Emulation - Konica Minolta magicolor 8650 User Manual

18
Settings are different depending on the environment used. Specify the settings according to the following
procedures.

For Remote Printer mode with NetWare 4.x bindery emulation

0 Before using bindery emulation, check that bindery emulation is compatible with the NetWare server.
1
From a client computer, log in to NetWare with the Administrator permission as Bindery.
2
Start up Pconsole.
3
From the "Available Options" list, select "Quick Setup", and then press the [Enter] key.
4
Enter the appropriate names in the "Print Server Name", "Printer Name", and "Print Queue Name"
fields, select "Other/Unknown" from the "Printer type" field, and then save the specified settings.
5
Press the [Esc] key to quit Pconsole.
6
Use the NetWare server console to load PSERVER.NLM.
% Next, specify the following settings for "NetWare Setting".
Item
IPX Setting*
Ethernet Frame Type*
NetWare Print Mode*
Print Server Name*
Printer Number*

For the print server mode with NetWare 4.x bindery emulation

0 Before using bindery emulation, check that bindery emulation is compatible with the NetWare server.
0 To use the printer server mode, the IPX protocol must be loaded on the NetWare server.
1
From a client computer, log in to NetWare with the Administrator permission as Bindery.
2
Start up Pconsole.
3
From the "Available Options" list, select "Quick Setup", and then press the [Enter] key.
4
Enter the appropriate names in the "Print Server Name", "Printer Name", and "Print Queue Name"
fields, select "Other/Unknown" from the "Printer type" field, and then save the specified settings.
5
Press the [Esc] key to quit Pconsole.
% Next, specify the following settings for "NetWare Setting".
Item
IPX Setting*
Ethernet Frame Type*
NetWare Print Mode*
Print Server Name*
Print Server Password*
Polling Interval*
Bindery/NDS Setting
File Server Name
18-6
Definition
Select "ON".
Specify the frame type to be used.
Select "NPrinter/Rprinter".
Specify the printer server name to allow it to serve as Nprint-
er/Rprinter (up to 63 characters).
Enter the Nprinter/Rprinter printer number.
Definition
Select "ON".
Specify the frame type to be used.
Select "PServer".
Specify the printer server name to allow it to serve as Pserver
(up to 63 characters).
If necessary, specify the password for the printer server (up
to 63 characters).
Specify an interval to make queries for jobs.
Select "NDS/Bindery".
Specify the priority file server name for Bindery mode (up to
47 characters).
EDNord - Istedgade 37A - 900 Aalborg - telefon 9633 3500
Appendix
Prior confirmation
Frame type
Print server name regis-
tered in step 4
Prior confirmation
Frame type
Print server name regis-
tered in step 4
magicolor 8650