Stapler (stapler/stacker only)
1
2
3
Note
Gain access to one screw through the hole (callout 2) in the metal plate.
Figure 115.
Stapler (1 of 2)
148 Removal and replacement
Remove the following FRUs:
• Face-up bin. See page 129.
• Stapler/stacker bin. See page 129.
• Back inner cover. See page 130.
• Front inner cover. See page 130.
• Front cover. See page 131.
• Back cover. See page 132.
• Controller PCA cover. See page 135.
• Carriage assembly. See page 144.
Remove the staple cartridge from the stapler.
Use a Torx #10 screwdriver to remove two mount screws (callout 1).
1
2
2
2
ENWW