Reinstall notes
Complete these actions before reinstalling the product-release handle:
CAUTION
If the product-release handle is not reinstalled correctly, the multifunction finisher will no longer
detach from the printer.
Figure 49.
Product-release handle (2 of 2)
ENWW
Move the internal latching mechanism (callout 3) toward the left side of the multifunction
finisher.
Be sure to align the spring (callout 4) with the inside edge (callout 5) of the product-release
handle.
2 3
2
5
4
2
Chapter 6 Removal and replacement 93