Back cover
WARNING!
Unplug the power cord that connects the output device to the printer or MFP.
1
2
3
Note
Do not remove the screws that have the painted heads (upper and lower screws).
Figure 132.
Back cover (1 of 3)
4
Figure 133.
Back cover (2 of 3)
162 Removal and replacement
Remove the 8-bin mailbox from the printer.
Remove the bubbled cover. See page 160.
Remove one (middle) screw (callout 1).
Unscrew the Jet-Link cable connector (callout 2) and disconnect the power cable (callout 3)
from the PCA.
2
1
3
ENWW