Use The Stapler; Select The Stapler - HP Color LaserJet 9500 Administrator's Manual

Use the stapler

The device can staple documents consisting of a minimum of two pages and a maximum of 50 pages
2
of 75-g/m (20-lb) Letter or A4 paper (a maximum of 25 pages for Ledger or A3 paper). The pages must
be 64 to 199 g/m
●
The stacker bin can hold up to 1,000 sheets stacked (without staples).
●
Heavier or coated media might have a stapling limit of fewer than 50 pages.
●
If the job you want to have stapled consists of only one sheet, or if it consists of more than 50
sheets, the device delivers the job to the bin without staples.

Select the stapler

You usually can select the stapler through your program or driver, although some options might be
available only through the driver.
Where and how you make selections depends on your program or driver. If you cannot select the stapler
from the program or driver, select the stapler from the control panel.
HP LaserJet 9040/9050 and HP Color LaserJet 9500
1.
Press
2.
Use
3.
Use
4.
Use
5.
Use
Your stapling options are None, One, or Two staples.
HP LaserJet 9040mfp/9050mfp and HP Color LaserJet 9500mfp
1. Touch Copy Settings.
2. At the Staple menu, touch Corner or Edge, depending on where you want the documents stapled,
and then touch OK. If you selected Booklet from the Copies per Page menu, your stapling options
are None, One, Two, and Saddle Stitch.
NOTE: The page icon on the right side of the touch screen shows the position of the staple.
HP LaserJet M9040 MFP and HP LaserJet M9050 MFP
1. Scroll to and touch Administration.
2. Scroll to and touch
3. Scroll to and touch
4. Touch Staples
5. Touch the desired stapling option, and then touch
16 Chapter 2 Finisher tasks
2 (17 to 53 lb) in weight for any paper size that the device supports.
to enter the menus.
and to scroll to CONFIGURE DEVICE
and to scroll to MULTIFUNC. FINISHER
and to scroll to Staples
and to scroll to the desired stapling option and press
Device Behavior.
Multifunct. Finisher.
and press
and press
and press .
Save
.
.
.
ENWW