Figure 67. Paper Deflector (2 Of 2) - HP Color LaserJet 9500 Service Manual

Reinstall notes
The parts of the paper deflector that should be reinstalled toward the back and toward the front
of the multifunction finisher contain mylar pieces that are shaped differently. Make sure that the
part that contains the angled mylar piece is reinstalled at the back of the multifunction finisher,
and that the part that contains the squared mylar piece is reinstalled at the front.
Reinstall the paper deflector parts so that the plastic shields (callout 4) curve down and toward
the inside of the device.
Figure 67. Paper deflector (2 of 2)
108 Removal and replacement
2 4
ENWW