Accumulator wings (stapler/stacker only)
1
2
3
4
Figure 106.
Accumulator wings
To reinstall
Note
To prevent a malfunction, make sure that you install the left wing and the right wing on the correct
sides.
ENWW
Grasp each accumulator wing near the shaft.
Slide the wings toward the center of the shaft.
Apply slight downward pressure to disengage the wings.
Press the locking tabs (callout 1) on the rotation pins, and push the pins out of the mounting
holes.
2 2 2 1
Chapter 6 Removal and replacement 139