Front cover
1
2
Figure 98.
Front cover
3
To reinstall
CAUTION
To prevent damage, make sure that the three locking tabs (not shown) are locked into the product
frame before you reinstall the screws.
Install the long screws in the top holes on the front cover.
ENWW
Remove the following FRUs:
• Face-up bin. See page 129.
• Stapler/stacker bin. See page 129.
• Back inner cover. See page 130.
• Front inner cover. See page 130.
Use a Torx #20 screwdriver to remove three screws (callout 1).
2 1
Remove the front cover.
Chapter 6 Removal and replacement 131