Controller PCA
1
Figure 161.
Controller PCA (1 of 4)
2
3
Figure 162.
Controller PCA (2 of 4)
Note
Make sure that you do not lose the metal washer connected to the grounding screw.
ENWW
Disconnect the power supply cable (callout 1) and the Jet-Link cable (callout 2).
2
Carefully lay the 8-bin mailbox on its front side (user LED side).
Remove one grounding screw (callout 3) and loosen one screw (callout 4).
4
1
3
Chapter 6 Removal and replacement 183