Power supply
Note
See figure 119 for the stapler/stacker or figure 120 for the stacker.
1
2
3
4
Figure 119.
Stapler/stacker power supply
Figure 120.
Stacker power supply
152 Removal and replacement
Remove the controller PCA cover. See page 135.
Unplug the power cable (callout 1) from the power supply.
Unplug the cable from the controller PCA (callout 2).
Stapler/stacker: Use a Torx #20 screwdriver to remove eight screws (figure 119; callout 3)
from the cover, and lift out the power supply and the cover.
Stacker: Use a Torx #20 screwdriver to remove one screw (figure 120; callout 3) from the
bracket, and lift out the power supply and the bracket.
1
2
3
2
2 3
2
2
ENWW