5.3
Lateral position of the roller and of the stacker
5.3.1
Lateral position of the roller
5.3.2
Lateral position of the stacker
1
2
3
4
5
Rule and control
–
For shirts with button stay:
The left roller should stand above the button stay.
–
For all other parts:
The rollers should be centered in compliance with the basic parts.
–
Start the automatic cycle.
–
Determine the position of the rollers.
Correction
–
Loosen the clamping screws 4 and 5.
–
Change the lateral position of the roller.
–
Retighten the clamping screws 4 and 5.
Rule and control
–
For shirts with button stay:
The button stay of the stacked part should be on the rest 2,in the
recess of the segment.
–
For all other parts:
The stacked part should lie on the rests with its entire width.
–
Start the automatic cycle.
–
Determine the position of the material in respect to the stacker.
Correction
–
Loosen the clamping levels 1 and 3.
–
Change the position of the stacker accordingly.
–
Retighten the clamping levers 1 and 3.
85